Iowa DOT CDL General Knowledge Practice Test 2

Test 2 of 5. Pick an answer for each question to see if it is right and why; your score appears at the end. You need 40 correct answers to pass, the same ratio as the real Iowa test.

A road through rolling cornfields and green farmland, a typical landscape of Iowa
  1. 1. How is a shipping container normally secured when it is carried on a special container chassis?

    Show answer

    Answer B: With its own locking devices that attach the container directly to the chassis frame

    Containers built for rail or ship transport have locking corners that fasten to a matching chassis; a container carried on a plain flatbed must be secured like any other cargo.

  2. 2. You are stopped in traffic on a steep upgrade behind another truck. How much space should you leave in front?

    Show answer

    Answer A: Enough that you can pull away without rolling back into the vehicle behind you

    Room ahead lets you get moving smoothly on a grade instead of having to hold the vehicle perfectly still or roll back toward the traffic behind.

  3. 3. What do you check about the fire extinguisher during the pre-trip?

    Show answer

    Answer C: That it is securely mounted, charged and that you know how to operate it

    An extinguisher must be held in its bracket, show a charged gauge and be understood by the driver, because a fire leaves no time to learn.

  4. 4. A company mechanic serviced your truck this morning and signed the work order. Do you still have to inspect the vehicle?

    Show answer

    Answer B: Yes, the driver is still responsible for being satisfied the vehicle is safe

    Shop work does not transfer the duty; the driver who takes the vehicle out remains responsible for being satisfied it is in safe operating condition.

  5. 5. You have chosen 40 miles per hour as your safe speed for a downgrade. How should the brakes be used?

    Show answer

    Answer A: Brake firmly to about 35, release, and repeat at 40

    Proper technique is firm application to about 5 miles per hour below the safe speed, then full release so the brakes cool before the next application.

  6. 6. Cargo carried inside the cab must never do which of these?

    Show answer

    Answer C: Block the driver view, restrict arm or leg movement, or block an emergency exit

    Anything inside the cab must leave the driver a clear view, free movement of the arms and legs, and an unobstructed way out of the vehicle.

  7. 7. At 55 mph, about how far does a vehicle travel during a typical 3/4 second perception time plus 3/4 second reaction time, before the brakes even begin to work?

    Show answer

    Answer C: About 120 feet

    Each 3/4 second at 55 mph covers about 60 feet, so perception and reaction together use up roughly 120 feet before braking starts.

  8. 8. When should a driver select the gear for a long, steep downgrade?

    Show answer

    Answer B: Before starting down the grade

    The low gear has to be chosen before the descent, because a heavy vehicle gaining speed may refuse to shift down at all.

  9. 9. A 40 foot straight truck and a 70 foot tractor-trailer make the same right turn. Which needs more room and why?

    Show answer

    Answer B: The tractor-trailer, because the longer the vehicle the farther inside the rear wheels track

    Off-tracking grows with the distance between the front and rear axles, so the longer combination cuts the corner much more sharply and needs extra room.

  10. 10. You are backing a tractor-trailer in a straight line and the trailer starts to drift to the left. What is the standard correction?

    Show answer

    Answer D: Turn the top of the steering wheel a little to the left, toward the drift

    Small corrections made in the direction the trailer is drifting bring it back into line; large or opposite movements make the drift worse.

  11. 11. What tells you that an air suspension bag has a problem?

    Show answer

    Answer B: The bag is leaking or damaged, or the vehicle sits unevenly on that side

    An air bag that leaks or is cut lets that corner of the vehicle settle, which throws the load onto the other suspension parts and changes the ride height.

  12. 12. During a right turn in a tractor-trailer, what are you looking for in the right hand mirror?

    Show answer

    Answer B: Whether the trailer will clear the curb and whether anything has moved alongside you

    The right mirror is what tells you how close the trailer wheels are running to the curb and whether a vehicle or a cyclist has slipped into the space on your right.

  13. 13. Why should the mirrors be checked repeatedly while you make a tight turn?

    Show answer

    Answer C: To watch the rear of the vehicle clear other vehicles and objects

    In a long vehicle the rear wheels cut inside the path of the front wheels, so only the mirrors show whether the rear is clearing curbs, poles and other vehicles.

  14. 14. How does a driver measure following distance in seconds?

    Show answer

    Answer A: Wait for the vehicle ahead to pass a fixed roadside object, then count the seconds until the front of your vehicle reaches the same object

    Counting from the moment the vehicle ahead passes a landmark until you reach it turns a gap you cannot judge in feet into a number of seconds.

  15. 15. A straight truck has a long body behind the rear axle. What happens to that overhang in a sharp left turn?

    Show answer

    Answer D: It swings out to the right and can strike a vehicle or an object on that side

    Body that hangs behind the rear axle swings the opposite way to the turn, so the tail of the truck sweeps out into the next lane or over the curb.

  16. 16. At highway speed, looking 12 to 15 seconds ahead means looking about how far down the road?

    Show answer

    Answer B: About a quarter of a mile

    Twelve to fifteen seconds of travel is roughly a quarter of a mile at highway speed, while the same amount of time is about one block in slow city traffic.

  17. 17. Experienced commercial drivers scan the road ahead by roughly how much travel time?

    Show answer

    Answer B: About 12 to 15 seconds

    Looking 12 to 15 seconds ahead gives a heavy vehicle enough room to slow or change lanes smoothly instead of reacting late.

  18. 18. Where are the OVERSIZE LOAD signs normally carried on a vehicle moving under such a permit?

    Show answer

    Answer A: On the front and the rear of the vehicle

    The warning signs face the traffic that meets the load and the traffic that comes up behind it, so they go on the front and the rear.

  19. 19. A tire may be regrooved only when what is true?

    Show answer

    Answer B: It carries a marking from the manufacturer showing that it is regroovable

    Only casings built with extra rubber under the tread and marked regroovable by the manufacturer may be cut, because others would be grooved into the belts.

  20. 20. How do you get more engine braking from an automatic transmission on a downgrade?

    Show answer

    Answer B: Select a lower range before starting down

    Locking the transmission into a lower range keeps engine speed high enough to hold the vehicle back and spares the service brakes.

  21. 21. You are pulling away from a curb in a 65 foot combination. Besides traffic, what must you watch?

    Show answer

    Answer B: The trailer wheels, which stay close to the curb and can strike it or an object on it

    Because of off-tracking, the rear wheels follow a tighter path than the front, so they stay near the curb while the cab is already out in the lane.

  22. 22. You pick up a sealed trailer at a shipper. What should you check before leaving the dock?

    Show answer

    Answer B: That the seal number matches the paperwork and that the doors are properly closed

    You cannot look at a sealed load, but you can confirm that the seal is intact, that its number matches the documents and that the doors are secure.

  23. 23. With the tractor coupled to the trailer, what should you see between the upper and lower fifth wheel plates?

    Show answer

    Answer A: No space at all between the two plates

    Any daylight between the plates means the trailer is not properly seated on the fifth wheel and the coupling can come apart under load.

  24. 24. A tire blows out at highway speed. What should the driver do first?

    Show answer

    Answer C: Hold the steering wheel firmly, stay off the brake and let the vehicle slow down

    Braking while a tire is gone can pull the vehicle out of line, so the driver keeps it straight and lets speed fall before easing off the road.

  25. 25. What actually lowers the amount of alcohol in the bloodstream?

    Show answer

    Answer B: Time

    The liver removes alcohol at a fixed rate, so nothing but the passage of time reduces blood alcohol concentration.

  26. 26. Under federal rules, which commercial vehicles must stop at every railroad crossing before proceeding?

    Show answer

    Answer D: Passenger buses and placarded hazardous materials vehicles

    Buses carrying passengers and vehicles required to display hazardous materials placards must stop at crossings, while other commercial vehicles slow and check.

  27. 27. The engine has overheated and you need to check the coolant. What is the safe procedure with a pressurized radiator cap?

    Show answer

    Answer A: Shut the engine off, let the system cool, protect your hands, turn the cap slowly to its first stop so pressure escapes, step back, then remove it

    A hot pressurized system throws steam and boiling coolant out of the opening, so the pressure is released slowly and only after the engine has cooled.

  28. 28. When a helper guides you while backing, what should be agreed on before you start?

    Show answer

    Answer D: A set of hand signals, especially the signal that means stop

    The driver and helper must agree on signals in advance, above all the stop signal, because they usually cannot hear each other.

  29. 29. What are the rules for using your turn signal before a turn or lane change?

    Show answer

    Answer A: Signal early, keep the signal on until the turn is finished, then cancel it

    An early, continuous signal tells others what you plan to do; cancelling afterward keeps the signal from misleading them.

  30. 30. At the scale your tractor drive axles are overweight while the trailer axles have room. Sliding the trailer tandems forward will do what?

    Show answer

    Answer C: Move weight off the drive axles and onto the trailer axles

    Sliding the trailer tandems forward brings the rear support closer to the load, so the trailer axles pick up more weight and the drive axles carry less; sliding them rearward does the opposite.

  31. 31. Why must the driver of a large vehicle keep it centered in its lane?

    Show answer

    Answer B: The vehicle needs the full width of the lane

    A commercial vehicle is close to lane width already, so any drift takes part of the vehicle into the next lane or onto the shoulder.

  32. 32. How long is an Iowa driver disqualified from commercial driving after operating a commercial vehicle with an alcohol concentration of 0.04 or more?

    Show answer

    Answer C: One year

    Iowa Code section 321.208 disqualifies a driver from operating a commercial motor vehicle for one year for driving one with an alcohol concentration of 0.04 or more, and for three years if hazardous materials were being carried.

  33. 33. Which parts of total stopping distance can a driver shorten simply by staying alert and looking far ahead?

    Show answer

    Answer B: Perception distance and reaction distance

    Alertness shortens the time spent recognizing a hazard and moving your foot to the pedal; braking distance depends on speed, weight, brakes and the road surface.

  34. 34. What is wrong with resting your foot on the clutch pedal between shifts?

    Show answer

    Answer B: It slowly wears the clutch out, because the pressure plate is never fully engaged

    Any weight on the pedal partly disengages the clutch, so it slips and wears; the foot belongs off the pedal once the shift is finished.

  35. 35. How soon must warning devices be placed after a commercial vehicle stops on the traveled part or the shoulder of a highway?

    Show answer

    Answer D: As soon as possible and in any case within 10 minutes

    The hazard warning flashers go on immediately and the warning devices must be in place as soon as possible, never later than 10 minutes after stopping.

  36. 36. You have a part load that fills only a third of a long trailer. How should it be placed?

    Show answer

    Answer C: Spread out and centerd side to side, so the weight sits over the axles

    A part load is spread over as much of the floor as possible and kept centerd, so no axle is overloaded and the vehicle stays balanced from side to side.

  37. 37. Using the snub braking method on a downgrade, when does the driver release the brakes?

    Show answer

    Answer A: After speed has dropped about 5 mph below the safe speed

    The driver brakes firmly to about 5 mph under the chosen safe speed, releases to let the brakes cool, then repeats when the safe speed returns.

  38. 38. An angry driver has cut in front of you and is now braking hard to provoke you. What is the safest response?

    Show answer

    Answer D: Drop back, avoid eye contact and let the driver go

    Giving an aggressive driver space and no response removes the conflict, while any answering gesture invites escalation you cannot control in a heavy vehicle.

  39. 39. What condition should the fifth wheel be in before you back under a trailer?

    Show answer

    Answer C: Jaws open, plate greased, and the fifth wheel tilted down toward the rear

    The jaws have to be open to take the kingpin, the plate must be lubricated to prevent hard steering, and the fifth wheel is tilted down at the rear so the trailer apron can ride up onto it.

  40. 40. Apart from the legal duty, what is the main practical reason for a thorough pre-trip inspection?

    Show answer

    Answer A: It finds problems that could cause a breakdown or a crash before the vehicle is on the road

    A defect found in the yard is an inconvenience, while the same defect found at highway speed can be a crash, so the inspection is where problems are cheapest to fix.

  41. 41. The shipper hands you the placards for a load that needs them. Who puts them on the vehicle?

    Show answer

    Answer C: The driver, who must also make sure they are the correct ones and are readable

    The shipper supplies the placards, but it is the driver who must place them on the vehicle and confirm that they match the load and can be read.

  42. 42. Under federal safety rules, what must the driver of a commercial vehicle do before starting a trip?

    Show answer

    Answer A: Be satisfied that the vehicle is in safe operating condition

    The driver is responsible for inspecting the vehicle and must be satisfied it is in safe operating condition before the trip begins.

  43. 43. Which drivers does the Iowa DOT list as exempt from holding a CDL in Iowa?

    Show answer

    Answer B: A farmer or a person working for a farmer operating a properly identified covered farm vehicle

    The Iowa DOT Commercial Driver's License Quick Guide lists covered farm vehicle operators, firefighters and peace officers on emergency duty, active duty military drivers, recreational vehicle operators, and in-home care aides among those exempt from holding an Iowa CDL.

  44. 44. Why should you avoid using your lights to tell a following driver that it is safe to pass you?

    Show answer

    Answer B: You may misjudge the gap and the driver will act on your signal

    The manual warns against signaling others to pass, because the responsibility for a head-on crash then rests on a judgment you could easily get wrong.

  45. 45. A strap runs from an anchor point on one side of the trailer, over the load, and down to an anchor point on the opposite side. How much of its working load limit counts toward the total required?

    Show answer

    Answer C: All of it

    A tiedown that is anchored on one side, passes over or around the cargo and is anchored on the other side counts its full working load limit toward the aggregate figure.

  46. 46. A dock crew loads and straps the freight. Who is responsible for the load being legal and secure on the road?

    Show answer

    Answer D: The driver

    Even when someone else loads and secures the freight, the driver must inspect it and remains responsible for it while driving.

  47. 47. When must a driver first inspect the cargo and its securement devices?

    Show answer

    Answer C: Before starting the trip, as part of the pre-trip inspection

    Cargo is part of the pre-trip inspection; the later checks within 50 miles and every three hours or 150 miles come on top of that first inspection.

  48. 48. For an unblocked article longer than 10 feet, the minimum is two tiedowns plus how many more?

    Show answer

    Answer B: One more for every additional 10 feet of length or any part of 10 feet

    Past the first 10 feet, one more tiedown is added for each additional 10 feet of length or any fraction of that distance.

  49. 49. How long must an Iowa commercial learner's permit be held before the CDL skills test may be taken?

    Show answer

    Answer B: At least 14 days

    The Iowa DOT requires an applicant to hold a commercial learner's permit for at least 14 days before applying for the CDL and taking the skills test.

  50. 50. Why must you never coast down a hill in neutral or with the clutch pushed in?

    Show answer

    Answer C: You lose the braking effect of the engine and your brakes may overheat and fail

    Engine braking is what keeps a heavy vehicle in check on a grade; coasting throws it away and leaves the service brakes to do all the work until they overheat.